Cisco Explorer 4700 Installation Guide download pdf (Page 506)

100

101

12-86

Device Manager Guide, Cisco ACE 4700 Series Application Control Engine Appliance

OL-26645-02

Chapter 12 Configuring Traffic Policies

Configuring Rules and Actions for Policy Maps

Setting Policy Map Rules and Actions for Layer 7 HTTP Optimization

Use this procedure to add rules and actions for Layer 7 HTTP optimization policy maps.

Assumptions

• An HTTP optimization action list has been configured. See Configuring an HTTP Optimization

Action List, page 13-3 for more information.

• A class map has been defined if you are not using the class-default class map. See Configuring

Virtual Context Class Maps, page 12-8 for more information.

Procedure

Step 1 Choose Config > Virtual Contexts > context > Expert > Policy Maps. The Policy Maps table appears.

Step 2 In the Policy Maps table, select the Layer 7 HTTP optimization policy map you want to set rules and

actions for, and then select the Rule tab. You can select multiple policy maps (hold down the Shift key

while selecting entries) and apply common rules and actions to them.

Step 3 In the Rule table, click Add to add a new rule, or select an existing rule, and then Edit to modify it. The

Rule configuration screen appears.

Step 4 In the Type field, select the type of rule to be used:

• Class Map—Indicates that the ACE appliance is to use an existing class map that identifies the rules

and corresponding actions.

• Match Condition—Indicates that the ACE appliance is to use a set of conditions to identify the rules

and corresponding actions.

Step 5 For class maps, check the Use Class Default check box to use the class-default class map, or clear the

check box to use a previously created class map.

Step 6 If you clear the Use Class Default check box:

a. In the Class Map Name field, select the class map to be used.

b. In the Insert Before field, indicate whether this rule is to precede another rule in this policy map.

–

N/A—Indicates that this option is not configured.

–

False—Indicates that this rule is not to precede another rule in this policy map.

–

True—Indicates that this rule is to precede another rule in this policy map.

c. If you select True, the Insert Before Policy Rule field appears. Select the rule that you want the

current rule to precede.

Step 7 For match conditions:

a. In the Match Condition Name field, enter a name for the match condition for this rule. Valid entries

are unquoted text strings with no spaces and a maximum of 64 alphanumeric characters.

b. In the Match Condition Type field, select the type of match condition to use and configure

condition-specific options as described in Table 12-32.

1 ... 505 506 507 ... 648

Comments to this Manuals

No comments

Cisco Explorer 4700 Installation Guide Page 506

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Cisco Explorer 4700