Cisco Cisco Unified Wireless IP Phone 7925G User Manual download pdf (Page 38)

30 OL-16132-01

Understanding Out-of-Range Alerts

Your system administrator can configure your phone to send you an audible alert (beep) when you are

out of range of the wireless network. When you hear the alert, the (no signal) icon will be

displayed on the phone screen.

When you are out of range of the wireless network, you will not be able to use the phone for features

requiring a wireless network connection, such as making and receiving calls.

If your system administrator enabled the out-of-range alert, depending on the configuration, you

might hear a beep only once, or every 10, 30, or 60 seconds until you are back within range of the

wireless network.

BLF-monitored line is

idle

See Using BLF to Determine a Line State, page 59.

BLF-monitored line is

in-use

See Using BLF to Determine a Line State, page 59.

BLF-monitored line is

in Do Not Disturb state

See Using BLF to Determine a Line State, page 59.

BLF indicator is

unavailable for this line

See Using BLF to Determine a Line State, page 59.

Remote line in use A shared line is in use remotely. See Using a Shared Line,

page 57.

Call on hold You have put this call on hold. See Using Hold and Resume,

page 39.

Call forward enabled You have forwarded your primary line. See Forwarding Calls

to Another Number, page 43.

Authenticated call See Tracing Suspicious Calls, page 62.

Encrypted call See Tracing Suspicious Calls, page 62.

Idle Intercom line The intercom line is not in use. See Placing or Receiving

Intercom Calls, page 50.

One-way Intercom call The intercom line is sending or receiving one-way audio. See

Placing or Receiving Intercom Calls, page 50.

Two-way Intercom call The recipient pressed the intercom line to activate two-way

audio with the caller. See

Placing or Receiving Intercom

Calls, page 50.

Icon Line or call state Description

1 ... 37 38 39 ... 126

No comments

Cisco Cisco Unified Wireless IP Phone 7925G User Manual Page 38