Cisco WUSB100 User's Guide download pdf (Page 10)

Chapter 3

Advanced Configuration

RangePlus Wireless USB Network Adapter

5. The Adapter connects to the network.

Connecting to the Network via Wi-Fi Protected Setup

NOTE: If the connection cannot be set up,

the message Registration failed appears. If

this happens, click Connect to try again

using the Wi-Fi Protected Setup button , or

click Skip to try again using the Adapter’s PIN

number, and then go to Enter the Adapter’s

PIN Number, page 7.

6. The Connected to Your Network screen appears. Click

Remember this network if you want to save your

network’s settings. Click Finish to exit the Wireless

Manager.

Connected to Your Network

Congratulations! The Adapter is connected to

the network.

Enter the Adapter’s PIN Number

Enter the PIN Number

1. Access the web-based utility of the router. (Refer to the

router’s documentation for instructions.)

2. On the router’s Wi-Fi Protected Setup screen, enter

the Adapter’s PIN number in the appropriate field.

Then perform the appropriate action to save the PIN

number; for example, click Register. (Refer to the

router’s documentation for instructions.)

3. The Adapter connects to the network and the

Connected to Your Network screen appears. If you want

the Wireless Manager to save your network’s settings,

click Remember this network. Click Finish to exit the

Wireless Manager.

Connected to Your Network

Congratulations! The Adapter is connected to

the network.

1 ... 9 10 11 ... 35

No comments

Cisco WUSB100 User's Guide Page 10