Cisco WUSB54GSC User's Guide download pdf (Page 8)

Chapter 3

Configuration

Compact Wireless-G USB Network Adapter with SpeedBooster

Click Back to return to the initial Link Information

screen. Click Status to go to the Wireless Network Status

screen. Click Save to Profile to save the currently active

connection settings to a profile. Click Refresh to reset the

statistics.

Site Survey

This screen displays a list of available networks in the table

on the left. You may click SSID, CH (Channel), or Signal to

sort by that field.

SSID This is the SSID or unique name of the wireless

network.

CH This is the channel that the network uses.

Signal This is the percentage of signal strength, from 0

to 100%.

Site Survey

Site Information

For each network selected, the following settings are

listed:

SSID This is the SSID or unique name of the wireless

network.

Wireless Mode This is the mode of the wireless network

currently in use.

Channel This is the channel to which the wireless network

devices are set.

Security This is the status of the wireless security

feature.

MAC Address This is the MAC address of the wireless

network’s wireless router or access point.

Refresh Click Refresh to perform a new search for

wireless devices.

Connect To connect to one of the networks on the list,

select the wireless network, and click Connect. If the

network’s wireless security is enabled, then you will view

this screen:

Click Continue

Make sure you have the security settings of your wireless

network, and then click Continue.

Proceed to the instructions for the wireless security screen

you see:

WEP (Wired Equivalent Privacy)

If the network has WEP encryption enabled, then you see

the WEP Key Needed for Connection screen.

WEP Security

WEP Select 64-bit or 128-bit encryption.

Passphrase Enter the network’s Passphrase, so a

WEP key is automatically generated. The passphrase is

case-sensitive and must be 16 or fewer alphanumeric

characters. It must match the passphrase of your other

wireless network devices and is compatible with Linksys

wireless products only. (For non-Linksys wireless products,

enter the WEP key manually.)

1 2 3 4 5 6 7 8 9 ... 38

Comments to this Manuals

No comments

Cisco WUSB54GSC User's Guide Page 8

Comments to this Manuals

Related products and manuals for Networking cards Cisco WUSB54GSC