Cisco WPC54GX4 User's Guide download pdf (Page 21)

Chapter 4: Setting Up and Connecting the Wireless-G Notebook Adapter with SRX400

Setting Up the Adapter

Wireless-G Notebook Adapter with SRX400

RADIUS

RADIUS uses the security of a RADIUS server. (This should only be used when a RADIUS server is connected to

the Router.) It offers two authentication methods, EAP-TLS and PEAP. Select one of these methods and follow

the appropriate instructions below.

EAP-TLS

Server Name - Enter the name of the authentication server (this is optional).

Certificate - Select the certificate you have installed to authenticate you on your wireless network. If you

want to use any certificate, keep the default setting, Trust Any.

PEAP

Password - Enter the password of your wireless network.

Server Name - Enter the name of the authentication server (this is optional).

Certificate - Select the certificate you have installed to authenticate you on your wireless network.

Inner Authen. - Select the authentication method used inside the PEAP tunnel.

Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the

previous screen.

Figure 4-20: Wireless Security - RADIUS Using EAP-TLS

Screen

radius (remote authentication dial-in user service): a

protocol that uses an authentication server to control

network access.

Figure 4-21: Wireless Security - RADIUS Using PEAP

Screen

1 ... 20 21 22 ... 63

No comments

Cisco WPC54GX4 User's Guide Page 21