Cisco WPC54GX4 User's Guide download pdf (Page 32)

Chapter 5: Using the Wireless Network Monitor

Creating a New Profile

Wireless-G Notebook Adapter with SRX400

Setting Up the Adapter with Manual Setup

Click Manual Setup on the Available Wireless Network screen to set up the Adapter manually.

1. After clicking Manual Setup, the Network Settings screen will appear. If your network has a router or other

DHCP server, click the radio button next to Obtain network settings automatically (DHCP).

If your network does not have a DHCP server, click the radio button next to Specify network settings. Enter

an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You must

specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and DNS

addresses, leave these fields empty.

IP Address - This IP Address must be unique to your network.

Subnet Mask - The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.

Default Gateway - Enter the IP address of your network’s Gateway here.

DNS 1 and DNS 2 - Enter the DNS address(es) of your wired Ethernet network here.

Click Next to continue, or click Back to return to the Available Wireless Network screen.

Figure 5-19: Available Wireless Network Screen

Figure 5-20: Network Settings Screen

1 ... 31 32 33 ... 63

No comments

Cisco WPC54GX4 User's Guide Page 32