Cisco 1700 User Manual download pdf (Page 73)

C-7

Cisco 1700 Router Hardware Installation Guide

78-5405-03

Appendix C Installing and Upgrading Router Memory

Figure C-5 Removing a Mini-Flash Module

Installing a DIMM

You can install a dual inline memory module (DIMM) to increase the amount of

dynamic random-access memory (DRAM) in the router.

Take the following steps to install a DIMM on the router motherboard.

Step 1 Locate the DIMM slot on the motherboard, shown in

Figure C-2.

Step 2 Remove any existing DIMM by pulling the DIMM slot

guides (shown in Figure C-6) away from the DIMM and

down towards the motherboard.

Step 3 Hold the replacement DIMM with the notched edge

away from you and facing the router.

Step 4 Insert the DIMM into the DIMM slot, making sure that

the notches on the edge of the DIMM are inserted over

the bars inside the DIMM slot, as in Figure C-6.

12614

Mini-Flash module release lever

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

No comments

Cisco 1700 User Manual Page 73