18
Release Notes for Cisco IOS Release 12.0(7)XV Feature Packs for the Cisco 800 Series
78-10446-01
Installation Notes
The ISDN Core Engine of RVS-COM supports the following B-channel protocols:
• CAPI layer B1
–
64 kbps with HDLC framing
–
64-kbps bit transparent operation with byte framing from the network
–
T.30 modem for fax group 3
–
Modem with full negotiation
• CAPI layer B2
–
V.120
–
Transparent
–
T.30 modem for fax group 3
–
Modem with full negotiation
• CAPI layer B3
–
Transparent
–
T.90NL with compatibility to T.70NL according to T.90 Appendix II
–
ISO 8208 (X.25 DTE-DTE) modulo 8 and windows size 2, no multiple logical connections
–
T.30 for fax group 3
–
Modem with full negotiation
• T.30 for fax group 3 (SFF file format [default], sending and receiving up to 14400 bit/s with ECM
option, modulations V.17, V.21, V.27ter, V.29)
• Analog modem (sending and receiving up to 14,400 bit/s, modulations V.21, V.22, V.22bis, V.23,
V.32, V.32bis)
Supported D-Channel Protocols
CAPI support is available only for the ISDN switch type Net3.
Supported Applications
ISDN-DCP supports CAPI and non-CAPI applications. Applications are supported that use one or two
B channels for data transfer, different HDLC-based protocols, Euro File transfer, or G4 fax; also
supported are applications that send bit-transparent data such as A/Mu law audio, G3 fax, analog
modem, or analog telephones.
Requirements
Before you can enable the RCAPI feature on the Cisco 800 series router, the following requirements
must be met:
• Cisco 800 series software with RCAPI support is installed on the router.
• CAPI commands are properly configured on the router.
• Both the CAPI local device console and RCAPI client devices on the LAN are correctly installed
and configured with RVS-COM client driver software.
Comments to this Manuals