Cisco 3020 - Cisco Catalyst Blade Switch Specifications download pdf (Page 287)

100

101

2-261

Cisco Catalyst Blade Switch 3020 for HP Command Reference

OL-8916-01

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands

setup

Use the setup privileged EXEC command to configure the switch with its initial configuration.

setup

Syntax Description This command has no arguments or keywords.

Command Modes Privileged EXEC

Command History

Usage Guidelines When you use the setup command, make sure that you have this information:

• IP address and network mask

• Password strategy for your environment

When you enter the setup command, an interactive dialog, called the System Configuration Dialog,

appears. It guides you through the configuration process and prompts you for information. The values

shown in brackets next to each prompt are the default values last set by using either the setup command

facility or the configure privileged EXEC command.

Help text is provided for each prompt. To access help text, press the question mark (?) key at a prompt.

To return to the privileged EXEC prompt without making changes and without running through the entire

System Configuration Dialog, press Ctrl-C.

When you complete your changes, the setup program shows you the configuration command script that

was created during the setup session. You can save the configuration in NVRAM or return to the setup

program or the command-line prompt without saving it.

Examples This is an example of output from the setup command:

Switch# setup

--- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: yes

At any point you may enter a question mark '?' for help.

Use ctrl-c to abort configuration dialog at any prompt.

Default settings are in square brackets '[]'.

Basic management setup configures only enough connectivity

for management of the system, extended setup will ask you

to configure each interface on the system.

Would you like to enter basic management setup? [yes/no]: yes

Configuring global parameters:

Release Modification

12.2(25)SEF This command was introduced.

1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 743 744

Comments to this Manuals

No comments

Cisco 3020 - Cisco Catalyst Blade Switch Specifications Page 287

Comments to this Manuals

Related products and manuals for Network switches Cisco 3020 - Cisco Catalyst Blade Switch