Data Sheet
© 2008–2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 6
●
ACLs for granular security and QoS implementation
●
Can be configured and monitored from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and Secure Sockets Layer (SSL)
encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and security
●
Private VLAN Edge (PVE) for simplified network isolation of guest connections or autonomous networks
●
Automatic configuration of VLANs across multiple switches through Generic VLAN Registration Protocol
(GVRP) and Generic Attribute Registration Protocol (GARP)
●
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with link aggregation
●
Enhanced rate-limiting capabilities, including back pressure, multicast, and broadcast flood control
●
Port mirroring for noninvasive monitoring of switch traffic
●
Mini jumbo frame support (1600 bytes)
●
Simple Network Management Protocol (SNMP) v1, v2c, v3 and Remote Monitoring (RMON) support
●
Fully rack-mountable using the included rack-mounting hardware
●
Simple, one-step automated installation and initial configuration
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco SFE2000P 24-Port
10/100 Ethernet Switch.
Table 1. Specifications for the Cisco SFE2000 24-Port 10/100 Ethernet Switch
Feature Description
Specifications
Ports
●
24 RJ-45 connectors for 10BASE-T/100BASE-TX
●
Four 10BASE-T/100BASE-TX/1000BASE-T with 2 Gigabit combo ports
●
Shared between mini Gigabit Interface Converter (mini-GBIC) ports
●
Console port
●
Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
●
Auto negotiate/manual setting
●
RPS port for connecting to redundant power supply unit
Buttons Reset button
Cabling type Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX, UTP Category 5 Ethernet or
better for 1000BASE-T
LEDs PWR, Fan, Link/Act, Speed, RPS, Master, Stack ID 1 through 8
Performance
Switching capacity Up to 12.8 Gbps, nonblocking
Forwarding rate
(based on 64-byte packets)
Up to 9.5 mpps
Stacking
Stack operation
●
Up to 8 units in a stack (192 ports)
●
Hot insertion and removal
●
Ring and chain stacking options
●
Master and backup master for resilient stack control
●
Auto-numbering or manual configuration of units in stack
(16 pages)
(144 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals