Cisco WS-X6148-RJ-21= Datasheet download pdf (Page 67)

2-67

Catalyst 6500 Series Ethernet Modules Installation Guide

OL-6265-02

Chapter 2 Ethernet Switching Modules

10-Gigabit Ethernet Modules

WS-X6704-10GE Ethernet Module

The WS-X6704-10GE Ethernet module (Figure 2-24) provides 4 10-Gbps full- or half-duplex ports.

Table 2-52 lists the module features, and Table 2-53 lists the module physical and environmental

specifications.

Figure 2-24 WS-X6704-10GE Ethernet Module Front Panel

Table 2-52 WS-X6704-10GE Ethernet Module Features

Feature Description

Ports per module 4

Connector type SC or InfiniBand 4X depending on the type of XENPAK transceiver

installed in the module.

Cabling distance Depends on the XENPAK transceiver installed in the module port.

Refer to Appendix B for supported XENPAK transceiver types and

cabling distances.

Speed 10 Mbps

Buffer size 16 MB

Maximum frame size Up to 9216 bytes

Supervisor engine support Supported on the following supervisor engines:

• Supervisor Engine 720

Queues per port

• Tx—1p7q8t (CoS to queue)

• Rx—1q8t (when using dCEF); 8q8t (CoS to queue)

Chassis/slot restrictions Not supported on the Catalyst 6503 chassis. Support on the

Catalyst 6513 chassis is restricted to slots 9 through 13.

Bus connection Dual 20-Gbps serial channel connections to the switch fabric.

WS-X6704-10GE

STATUS

LINK 1

LINK 2

LINK 3

LINK 4

PORT 1

TX RX

PORT 2

TX RX

PORT 3

TX RX

PORT 4

TX RX

4 PORT 10 GIGABIT ETHERNET

99885

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 75 76

Comments to this Manuals

No comments

Cisco WS-X6148-RJ-21= Datasheet Page 67

Comments to this Manuals

Related products and manuals for Network switches Cisco WS-X6148-RJ-21=