Cisco 1004-CH - 1004 Enet/ISDN/Bri Rter Specifications Page 20
- Page / 54
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Cisco 7500 Series
Cisco Site Preparation Guide
3-20
Power Supply Requirements
The Cisco 7507 contains either one 700W AC-input power supply or one 700W DC-input power
supply. An optional second power supply, identical to the first, can be added for redundant power.
These power supplies are automatically load-sharing and redundant, which means a second power
supply can be installed or replaced without interrupting system operation.
Each power supply should be connected to a separate AC or DC source, so that, in case of an input
power line or power supply failure, the second power supply maintains uninterrupted system power.
Ideally, an uninterruptible powers source (UPS) would be available for each AC-input power supply.
Cisco 7513
This section includes the physical specifications and power supply requirements of the Cisco 7513.
Physical Specifications
Table 3-18 lists the physical specifications for the Cisco 7513.
AC current rating 12A maximum at 100 VAC, 6A maximum at 240 VAC with the chassis fully
configured
Airflow 140 cfm (cubic feet per minute) through the system blower
Operating temperature 32 to 104 F (0 to 40 C)
Nonoperating temperature –4 to 149 F (–20 to 65 C)
Humidity 10 to 90%, noncondensing
Table 3-19 Cisco 7513 Physical Specifications
Description Specification
Backplane 13-slot, two 1.0677-Gbps CyBuses: 11 interface processor slots plus the two
RSP2 slots
Dimensions
(H x W x D)
33.75 x 17.5 x 22 in. (85.73 x 44.45 x 55.88 cm)
Chassis width including rack-mount flanges is 18.93 in (48.1 cm)
Chassis depth including power cord and cable management fixture is 24 in.
(60.96 cm)
Weight Chassis with blower module: 75 lb (34.02 kg)
Chassis with blower module and 1 power supply: 100 lb (45.36 kg)
Chassis with blower module and 2 power supplies: 125 lb (56.7 kg)
Chassis with blower module, 2 power supplies, and all slots filled: 160 lb
(72.58 kg) Each processor module weighs 2.5 lb (1.13 kg)
Power dissipation 1600W with a maximum configuration and one AC-input power supply
1600W with a maximum configuration and one DC-input power supply
1700W nominal with a maximum configuration and two AC- or DC-input
power supplies
Heat dissipation 1600W (5461 Btu/hr)
AC-input voltage and current 100 VAC
1
at 16 amps (A) maximum
2
wide input with power factor correction
(PFC)
240 VAC at 7A maximum
Table 3-18 Cisco 7507 Physical Specifications (Continued)
Description Specifications
- System Specifications 1
- Cisco 760 Series 2
- Cisco 1000 Series 3
- Cisco 1600 Series 5
- System Specifications 3-7 7
- Cisco 2500 Series 10
- Cisco Site Preparation Guide 10
- Cisco 3600 Series 12
- Cisco 4000 Series 14
- Other External Connections 15
- Physical Specifications 16
- External Connections 16
- Cisco 7500 Series 18
- Cisco 7507 19
- Cisco 7513 20
- Power Supply Requirements 21
- System Specifications 3-23 23
- System Specifications 3-25 25
- Cisco 7200 Series 26
- • Port adapters 27
- Cisco LightStream 1010 28
- • Feature card 29
- • Port adapter module carrier 29
- Ventilation Requirements 30
- Catalyst 1900(r) 31
- • 100BaseTX ports: 32
- • 100BaseFX ports: 32
- • Management console port 32
- • Rack mount kit included 32
- Catalyst 2820 33
- Catalyst 3000 35
- Catalyst 3000 Matrix 36
- Catalyst 5000 37
- FastHub 100 Series 41
- Cisco IGX 8400 Series Family 42
- Processor Functions 45
- • System clock module 45
- • Alarm relay module (ARM) 45
- • Transparent data service 46
- • Flexible clocking 46
- System Specifications 3-49 49
- Common Core Group 49
- System Specifications 3-51 51
- Service Interface Group 51
- MGX 8220 Edge Concentrator 53
Related products and manuals for Networking Cisco 1004-CH - 1004 Enet/ISDN/Bri Rter
Networking Cisco ATA188-I1 User Manual
(28 pages)
(28 pages)
Networking Cisco PA-FE-FX Specifications
(64 pages)
(64 pages)
Networking Cisco 4500M Installation Guide
(270 pages)
(270 pages)
Networking Cisco Catalyst 4224 User Manual
(26 pages)
(26 pages)
Networking Cisco 3620 Installation Guide
(24 pages)
(24 pages)
Networking Cisco PRP-1= Specifications
(88 pages)
(88 pages)
Networking Cisco 2503 User's Guide
(42 pages)
(42 pages)
Networking Cisco 3620 User Manual
(8 pages)
(8 pages)
Networking Cisco E2500 User Manual
(27 pages)
(27 pages)
Networking Cisco RV180 User Manual
(7 pages)
(7 pages)
© 2020, manymanuals.com. All rights reserved. | 0.928 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals