Cisco 1004-CH - 1004 Enet/ISDN/Bri Rter User Manual download pdf (Page 43)

10. IDE RAID Controllers

Tekram D690CD IDE PCI Cache Controller (with RAID level 1 Mirroring and caching)•

ARCO Inc. DupliDisk IDE disk mirroring controller

Support for ATA, IDE, E−IDE and UDMA drive. Controllers available can be plugged into ISA and

PCI slots, and directly into the IDE controller. Furthermore, 3.5−inch and 5.25−inch Bay Mount units

are available that fit into the respective drive bays. More information at Arco's web site. Make sure

you have at least rev 3.00 of the firmware.

•

3ware Escalade IDE RAID controllers

3ware's 5000−series and 6000−series controllers have been supported since kernel 2.2.15. Support for

the 7000−series controllers and RAID5 on the 6000−series controllers requires kernel 2.4.5 or 2.2.20

or better. Also make sure to use a recent firmware for RAID 5, since older firmware revisions (and

older versions of the driver) can cause data corruption when a RAID 5 array runs degraded.

8000−series SATA cards also work fine with recent 2.4.x or 2.6.x kernels. 9000−series cards are

supported with the 3w−9xxx driver (instead of the older 3w−xxxx driver).

•

Adaptec ATA RAID 2400A

4−port ATA/100 controller which supports RAID 0, RAID 1, RAID 1+0, and RAID 5. Use the

dpt_i2o driver, which is included in recent 2.4.x kernels.

•

Promise SuperTRAK SX6000

6−port ATA/100 controller which supports RAID 0, RAID 1, RAID 1+0, RAID 3, and RAID 5. Use

the pti_st driver or the generic i2o drivers. Be sure to set the BIOS on the card for "Other OS" instead

of "Linux", and check for firmware updates.

•

10. IDE RAID Controllers 38

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 174 175

No comments

Cisco 1004-CH - 1004 Enet/ISDN/Bri Rter User Manual Page 43