Cisco 3800 Series Specifications download pdf (Page 24)

Note For information about installing a second power supply in the Cisco 3845 router, see the Cisco 3800 series hardware

installation documentation at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/3800/hw/index.htm

Caution Before connecting the RPS to the router, make sure that either the RPS is in standby mode or the RPS AC power is

disconnected. Connecting the RPS to AC power automatically places the RPS in active mode.

Figure 20 RPS Connector on the Cisco 3825 Router

Figure 21 Plugging the RPS Connector into the Cisco 3825 Router

WAN, LAN, and Voice Connections

The connections and cables listed in Table 3 are described in detail in the Cisco 3800 series hardware installation documents at

the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/3800/hw/index.htm

Note An Ethernet cable is typically provided with the router. Additional cables and transceivers can be ordered from Cisco. For

ordering information, contact customer service. For cable pinouts, see the

Cisco Modular Access Router Cable Specifications document.

Warning

Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

Statement 1036

121273

COMPACT FLASH

SYS

AUX

ACT

RPS

IP PWR

AIM0

AIM1

PVDM0

PVDM1

PVDM2

PVDM3

RPS connector

21292

COMPACT FLASH

SYS

ACT

SYS

PWR

RPS

AUX

PWR

AIM0

AIM1

PVDM0

PVDM1

PVDM2

PVDM3

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comments to this Manuals

No comments

Cisco 3800 Series Specifications Page 24

Comments to this Manuals

Related products and manuals for Networking Cisco 3800 Series