19
Step 8 Connect the plug end of the 5V DC power adaptor cord
into an electrical power outlet.
When the Cisco ATA is properly connected and
powered up, the green activity LED flashes to indicate
network activity. This LED is labeled ACT on the rear
panel of the Cisco ATA 186 and is labeled LINK on the
rear panel of the Cisco ATA 188.
Caution Do not cover or block the air vents on either the
top or the bottom surface of the Cisco ATA.
Overheating can cause permanent damage to the
unit.
Power-Down Procedure
Caution If you need to power down Cisco ATA 186 or
Cisco 188 at any time, use the following
power-down procedure to prevent damage to the
unit.
Comments to this Manuals