Cisco CX-FEIP-2TX= Installation and con?guration Specifications download pdf (Page 157)

3-17

Cisco ONS 15454 Installation and Operations Guide, R3.2

March 2002

Chapter 3 Node Setup

Viewing ONS 15454 Inventory

• SSM Message Set—Set to Generation 1.

• Quality of RES—Set to DUS.

• Revertive—Is not relevant for internal timing; the default setting (checked) is sufficient.

• Revertive Time—The default setting (5 minutes) is sufficient.

Step 4 In the BITS Facilities section, enter the following information:

• State—Set BITS 1 and BITS 2 to OOS (Out of Service).

• Coding—Is not relevant for internal timing. The default (B8ZS) is sufficient.

• Framing—Is not relevant for internal timing. The default (ESF) is sufficient.

• Sync Messaging—Checked

• AIS Threshold—Is not available.

Step 5 In the Reference Lists section, enter the following information

• NE Reference

–

Ref1—Set to Internal Clock.

–

Ref2—Set to Internal Clock.

–

Ref3—Set to Internal Clock.

• BITS 1 Out/BITS 2 Out—Set to None

Step 6 Click Apply.

Step 7 Log into a node that will be timed from the node set up in Steps 1–4.

Step 8 In the CTC node view, click the Provisioning > Timing tabs.

Step 9 In the General Timing section, enter the same information as entered in Step 3, except for the following:

• Timing Mode—Set to Line.

Reference Lists

• NE Reference

–

Ref1—Set to the OC-N trunk card with the closest connection to the node in Step 3.

–

Ref2—Set to the OC-N trunk card with the next closest connection to the node in Step 3.

–

Ref3—Set to Internal Clock.

Step 10 Click Apply.

Step 11 Repeat Steps 7–10 at each node that will be timed by the node in Step 3.

3.7 Viewing ONS 15454 Inventory

The Inventory tab (Figure 3-10) displays information about cards installed in the ONS 15454 node

including part numbers, serial numbers, hardware revisions, and equipment types. The tab provides a

central location to obtain information and to determine applicability of ONS 15454 Product Change

Notices (PCNs) and Field Service Bulletins (FSBs). Using the ONS 15454 export feature, you can export

inventory data from ONS 15454 nodes into spreadsheet and database programs to consolidate ONS

15454 information for network inventory management and reporting.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 492 493

Comments to this Manuals

No comments

Cisco CX-FEIP-2TX= Installation and con?guration Specifications Page 157

Comments to this Manuals

Related products and manuals for Networking Cisco CX-FEIP-2TX= Installation and con?guration