Cisco 159330 User's Guide download pdf (Page 30)

2-2

Cisco AC/DC Power System User Guide, R1.0

May 2006

Chapter 2 System Installation

2.1.3 Installation and Commissioning Checklist

• Insulated Phillips and flathead screwdriver sets

• Insulated wire & cable strippers/crimpers (for ground lug, DC cable, alarm, and GMT cable

installations)

• 8mm socket or wrench for ground cable installation

2.1.3 Installation and Commissioning Checklist

• AC/DC system shelf mounted securely in rack

• 1 RU Distribution Shelf mounted securely in rack directly above the system shelf (if applicable)

• AC and DC cabling meets local and national electrical code specifications

• Installation in ETSI racks allows for front-to-back ventilation and the use of a ventilated door and

cabinet top

• System alarm cabling is installed and secure

• Power cables are secure and installed correctly

• Rectifiers are installed and seated correctly in the system shelf

• The controller and 1 RU Distribution faceplates are installed and secure (if applicable)

• System shelf rear cover is installed and secured

• System powers up and all red LEDs are extinguished after a few minutes

2.1.4 Installation Materials

Table 2-1 and Table 2-2 list the Cisco supplied installation materials that ship with the Cisco AC/DC

Power System. Table 2-3 lists materials that will need to be furnished at the install location.

Table 2-1 Supplied Materials for the System Shelf

Description Qty Use

M6 0x20mm screw (thread forming) 6 Shelf mounting screws (ETSI racks/cabinets)

12-24 x1/2” screw (thread forming) 6 Shelf mounting screws (ANSI, IEC racks/

cabinets)

M6 cage nut 6 Shelf mounting nut (ETSI racks/cabinets)

Mounting bracket 600mm ETSI rack 2 Ear mounts (ETSI racks/cabinets)

2A GMT fuse 2 GMT fuse panel

5A GMT fuse 2 GMT fuse panel

10A GMT fuse 2 GMT fuse panel

15A GMT fuse 2 GMT fuse panel

Standard AC plug 4 AC plugs that meet local requirements

Cable ties 12 Securing cables

ESD wrist strap 1 ESD protection

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 95 96

No comments

Cisco 159330 User's Guide Page 30