Cisco AIM-VPN/SSL-2= Datasheet Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
DES/3DES/AES VPN Encryption Module (AIM-VPN/SSL-1, AIM-VPN/SSL-2, and AIM-VPN/SSL-3)
show crypto engine accelerator statistic
13
Cisco IOS Security Configuration Guide
Usage Guidelines No specific usage guidelines apply to the hardware accelerators.
IPsec VPN SPA
Enter the slot keyword to display platform statistics for the corresponding IPSec VPN SPA. This output
will not include network interface controller statistics.
Enter the all keyword to display platform statistics for all IPSec VPN SPAs on the router. This output
will not include network interface controller statistics.
Enter the detail keyword to display platform statistics for the IPSec VPN SPA and network interface
controller statistics. Note that the controller statistics contain L2 counters.
Examples
Hardware VPN Module
The following example displays compression statistics for a hardware VPN module:
Router# show crypto engine accelerator statistic
Device: AIM-VPN/SSL-3
Location: AIM Slot: 0
Virtual Private Network (VPN) Module in slot : 0
Statistics for Hardware VPN Module since the last clear
of counters 85319 seconds ago
560 packets in 560 packets out
95600 bytes in 124720 bytes out
0 paks/sec in 0 paks/sec out
0 Kbits/sec in 0 Kbits/sec out
0 packets decrypted 560 packets encrypted
0 bytes before decrypt 124720 bytes encrypted
0 bytes decrypted 95600 bytes after encrypt
0 packets decompressed 0 packets compressed
0 bytes before decomp 0 bytes before comp
0 bytes after decomp 0 bytes after comp
0 packets bypass decompr 0 packets bypass compres
0 bytes bypass decompres 0 bytes bypass compressi
0 packets not decompress 0 packets not compressed
0 bytes not decompressed 0 bytes not compressed
1.0:1 compression ratio 1.0:1 overall
10426 commands out 10426 commands acknowledged
Last 5 minutes:
0 packets in 0 packets out
0 paks/sec in 0 paks/sec out
0 bits/sec in 0 bits/sec out
0 bytes decrypted 0 bytes encrypted
0 Kbits/sec decrypted 0 Kbits/sec encrypted
1.0:1 compression ratio 1.0:1 overall
Errors:
ppq full errors : 0 ppq rx errors : 0
cmdq full errors : 0 cmdq rx errors : 0
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA to
support the IPsec VPN SPA on Cisco 7600 series routers and Catalyst 6500
series switches.
12.4(9)T Output was added for the AIM-VPN Secure Sockets Layer (SSL)
encryption module.
Release Modification
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Comments to this Manuals

No comments