Cisco 4250HDC Operations Instructions download pdf (Page 8)

STANDARD HDTV SET UP GUIDE

QUESTIONS? CALL 503.632.41148

Connecting the 4250HDC with an HDMI Connector

Important Notes Regarding the HDMI Interface on the Set-Top

The HDMI interface automatically congures the audio output for a format supported by the television. Because not all TVs support the Dolby®

Digital input, the HDMI interface may automatically select a 2-channel stereo audio conguration instead of Dolby Digital, which it carries over

to the other digital audio outputs of the set-top. This prevents your home theater system or Dolby Digital decoder from providing the full Dolby

Digital surround-sound eect.

You can override this conguration by completing the following steps.

1. Press SETTINGS twice on the remote control to open the General Settings menu.

2. Press MOVE UP or MOVE DOWN to select the option Audio: Digital Out.

3. Press MOVE RIGHT to select Dolby Digital. This setting will send Dolby Digital audio to the HDMI, DIGITAL AUDIO OUT, and

OPTICAL AUDIO OUT connectors on the set-top.

Notes:

• If the TV is not Dolby Digital capable, it may not produce audio through its speakers when the Audio: Digital Out setting on the set-top

is set to Dolby Digital. You can either switch the Audio: Digital Out setting back to HDMI when you are not using the home theater or

Dolby Digital decoder, or you can connect the baseband audio outputs (OUT 1 Audio Left and Right) to the TV.

• Digital content is encrypted with High-Bandwidth Content Protection (HDCP) on the DVI/HDMI port. This set-top is not compatible with

devices that do not support HDCP. You must use either the PrPbY or 1394 connection to connect the set-top to these devices.

WARNING:

Electric shock hazard! Unplug all electronic devices before connecting or disconnecting any device

cables to the set-top.

T12968

Explorer Set-top

THIS DEVICE IS INTENDED TO

BE ATTACHED TO A RECEIVER

THAT IS NOT USED TO RECEIVE

OVER-THE-AIR BROADCAST

SIGNALS. CONNECTION OF THIS

DEVICE IN ANY OTHER FASHION

MAY CAUSE HARMFUL

INTERFERENCE TO RADIO

COMMUNICATIONS AND IS IN

VIOLATION OF THE FCC RULES,

PART 15.

120 VAC

60HZ 400W

LISTED 14H1

CABLE EQUIP.

120 VAC

60HZ 40W

CABLE

1394

S - VIDEO

OUT

OPTICAL

AUDIO OUT

USB

CABLE

OUT

VIDEO

OUT

DIGITAL

AUDIO OUT

HDTV

1394

eCM MAC: 001868C16907

STB RF MAC: 001868C16906

STB SN: SABNFSRVG

MULTI-STREAM CABLE CARD

AVIS:

RISQUE DE CHOC

ELECTRIQUE NE PAS OUVRIR

CATV CONVERTER

MADE IN MEXICO

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Back of HDTV

HDMI

AUDIO

CENTER

CHANNEL IN

AUDIO IN

DVI/HDCP

ANT (75 )

INOUT

ANT-1

HD 2

OUT

ANT-2

VIDEO

MONO

AUDIO

ON OFF

HD 1

S-VIDEO

VIDEO

AUDIOAUDIO

Cable Input

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Cisco 4250HDC Operations Instructions Page 8

Comments to this Manuals

Related products and manuals for Digital Video Recorders (DVR) Cisco 4250HDC