Cisco Explorer 3240HD User's Guide download pdf (Page 10)

How Do I Choose

the Screen Type?

1. Turn on the TV.

2. Turn off the 3250HD.

3. Press the INFO and GUIDE buttons on the front of the 3250HD

simultaneously.

4. Press

on the remote control to start the HDTV Setup Wizard.

5. Follow the easy instructions on the TV screen.

6. Press the CBL and POWER keys on the remote control, and then the

3250HD will turn on.

After you connect your entertainment devices, follow these instructions

before you begin watching TV.

1. Connect the 3250HD to your HDTV, VCR, and other entertainment

devices as shown in the diagrams on the following pages. (The

diagrams in this guide do not cover every possible combination.)

2. Connect the 3250HD to the coaxial cable coming from the wall.

3. Plug the 3250HD and the TV into an AC power source.

4. Do not turn on the 3250HD or HDTV yet.

5. Wait until you see one of the following displays on the front of the

3250HD:

• Current time

• Four dashes (- - - -)

Important: It may take several minutes for the 3250HD to receive the

latest software, programming, and service information. When the front

panel displays the time or four dashes, the update is complete.

6. After the update is complete, turn on the TV. Do not turn the 3250HD on

yet. Go to How Do I Choose the Screen Type, next in these instructions.

How Do I Connect

the 3250HD to My

TV and Other

Entertainment

Devices?

When you are ready to connect the 3250HD and to choose the screen type

for your TV, follow these instructions.

Connecting Entertainment Devices

1 ... 9 10 11 ... 28

No comments

Cisco Explorer 3240HD User's Guide Page 10