Cisco Explorer 8300 User's Guide download pdf (Page 31)

ADD STORAGE WITH A SATA HARD DISK DRIVE (OPTIONAL), CONTINUED

If the SATA drive is

improperly disconnected,

one of the following warning

banners appears.

If you improperly discon-

nected the SATA drive from

your DVR, then attempt to

reconnect the drive to your

DVR, a warning banner

appears. Follow the on-screen

instructions to restart the DVR.

If the power or data cables

for the SATA drive are

unplugged from the DVR,

a warning banner appears.

Check the DVR to make sure

the power and data cables are

properly plugged in.

If the DVR cannot read

the SATA drive, a warning

banner appears. Follow the

on-screen instructions to

format the SATA drive.

Attention

The external recording device is not functioning properly.

Check to make sure the power and data cables are plugged in properly.

Yes, Format Cancel

Attention

The external storage device appears to be corrupted.

Format this external storage device?

NOTE: Existing recordings on this external storage device will be erased.

If you press Cancel, the external storage device will not be available.

TROUBLESHOOTING THE SATA DRIVE

If you encounter problems when connecting or disconnecting your SATA hard disk

drive, use the following warning banners to troubleshoot any drive issues.

WARNING: Avoid electric shock. Unplug all electronic devices

before connecting or disconnecting any device cables to the DVR.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

No comments

Cisco Explorer 8300 User's Guide Page 31