Cisco MGBSX1 User's Guide download pdf (Page 3)

Chapter 1: Using the Gigabit SFP Modules

Introduction

Thank you for choosing the Gigabit SFP Modules. These Modules insert into

the mini-GBIC ports on either the SR2024 or SR224G, creating new Gigabit

ports. Each Gigabit SFP Module is hot-swappable, meaning you can connect

them even when the switch is running.

Use the following directions for installing and removing either the MGBLH1

and MGBSX1 or the MGBT1.

Installation and Removal Direc-

tions for the MGBLH1 and

MGBSX1

1. Insert the Gigabit SFP Module with

the printed side up and the rubber

port cap facing out.

2. Remove the Gigabit SFP Module’s

rubber port cap.

3. Connect the fiber cable’s LC Con-

nector to the Gigabit SFP Module’s

port.

Figure 1-1: Insert the Module

Figure 1-2: Removing the rubber port cap

Figure 1-3: Connect the fiber cable

1 2 3 4 5 6 7

No comments

Cisco MGBSX1 User's Guide Page 3