Property of TheGreenBow – Sistech S.A. © 2014
IPsec VPN Router Configuration
1 Introduction
1.1 Goal of this document
This configuration guide describes how to configure TheGreenBow IPsec VPN Client software with a Cisco
RV220W VPN router to establish VPN connections for remote access to corporate network.
1.2 VPN Network topology
In our VPN network example (diagram hereafter), we will connect TheGreenBow IPsec VPN Client software to
the LAN behind the Cisco RV220W router. The VPN client is connected to the Internet with a DSL connection
or through a LAN. All the addresses in this document are given for example purpose.
1.3 Cisco RV220W Restrictions
No known restrictions.
1.4 Cisco RV220W VPN Gateway
Our tests and VPN configuration have been conducted with Cisco RV220W firmware releases 1.0.2.4 &
1.0.4.17.
1.5 Cisco RV220W VPN Gateway product info
It is critical that users find all necessary information about Cisco RV220W VPN Gateway. All product info, User
Guide and knowledge base for the Cisco RV220W VPN Gateway can be found on the Cisco website:
http://www.cisco.com/c/en/us/products/routers/rv220w-wireless-network-security-firewall/index.html
Cisco RV220W Product page
http://www.cisco.com/c/dam/en/us/products/collateral/routers/r
v220w-wireless-network-security-firewall/brochure_c02-
637535.pdf
http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv220w
/administration/guide/rv220w_admin_v1-0-1-0.pdf
IPsec VPN Client
(Remote)
IPsec VPN Client
as seen on LAN
Comments to this Manuals