Cisco 2600 Series User Manual download pdf (Page 7)

Rack-Mounting the Cisco 2600 Series Router 7

Installing the Router in a Rack

After the brackets are secured to the chassis, you can rack-mount it. Using screws that you provide,

attach the chassis to the rack. (See Figure 7 and Figure 8).

Figure 7 Mounting the Chassis in a Rack (19-Inch Rack with a 17.5-Inch Opening)

Figure 8 Mounting the Chassis in a Rack (19-Inch Rack with a 17.75-Inch Opening or a

23- or 24-Inch Rack)

What to Do after Installing the Router Hardware

After you have installed the router, make all necessary LAN and WAN connections, connect the

power cable to the rear panel of the router and the power source, and then power it ON. (If the router

does not power ON, proceed to the “Troubleshooting the Router” appendix in the Cisco 2600 Series

Hardware Installation Guide included in your router package.)

For information on making LAN and WAN connections, refer to the hardware guides included in

your router package.

For initial software conﬁguration information, refer to the Software Conﬁguration Guide included

in your router package.

110V 60 Hz

1.6A MAX

27718

The second bracket attaches to the rack at the other side of the chassis.

The brackets can also be installed with the front panel forward.

19-inch rack

110V 60 Hz

1.6A MAX

27717

19-inch

brackets

23-inch and 24-inch

brackets

1 2 3 4 5 6 7 8 9 10

No comments

Cisco 2600 Series User Manual Page 7