Data Sheet
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 12
Feature Specification
QoS Flexible number of queues per interface:
●
Up to 128,000 queues
●
Three levels of hierarchy
●
Two LLQ queues per policy, with up to 1,000 policies
8-kbps policing and queuing granularity
<100-microsecond latency for high-priority applications
Real-time traffic 4,000 CRTP sessions
Security IPsec
*
: 10,000 tunnels (Hardware is capable of 10,000 tunnels. Currently supported: 4,000)
FW/NAT: 1,000,000 sessions and 40,000 sessions per sec setup rate
L3VPN 8,000 VRF instances
GRE 4,000 tunnels
Cisco Unified Border
Element (SP Edition)
(formerly called Session
Border Controller or SBC)
64,000 sessions (each session represents a complete voice call with 14 Session Initiation Protocol messages per
call; that is, two call legs on the SBC consisting of two media legs for a bidirectional media flow and seven SIP
messages per call leg)
*
This product includes software developed by Cavium Networks.
Please refer to the Cisco ASR 1000 Series Routing Processor data sheet for a list of software features and benefits
applicable to broadband, service provider edge, and enterprise deployments.
Product Specifications
Table 7 and Table 8 lists specifications of the integrated ESP Modules in the Cisco ASR 1001 and Cisco ASR 1002-
F chassis respectively. Table 9 lists the specifications of the Cisco ASR 1000 Series 5-, 10-, 10-N-, 20- and 40-Gbps
ESP modules.
Table 7. Specifications of the integrated ESP Module in the Cisco ASR 1001 chassis
Feature Specification
Product compatibility ESP module is integrated in Cisco ASR 1001 chassis.
Software compatibility Cisco IOS XE Software Release 3.2.S or later (minimum SW release for the integrated ESP module in the ASR1001
chassis)
Protocols Refer to Cisco IOS XE Software Release 3.2S (or later) protocol support
Connectivity Refer to Cisco ASR 1000 Series SIP data sheet for SPA support. The SIP is integrated in the Cisco ASR1001
chassis.
Memory For ASR 1000 ESP integrated in the ASR1001 chassis: 1-GB
Reliability and availability Software Redundancy support: YES.
Hardware Redundancy support: NO
Support for online insertion and removal (OIR)
Support for Nonstop Forwarding (NSF) and Stateful Switchover (SSO)
MIBs RFC 2737 compliant
Network management Network management through Cisco ASR 1000 Series Route Processor:
●
Telnet (command-line interface [CLI])
●
Console port (through the CLI)
●
Simple Network Management Protocol (SNMP) (RFC 2665)
No. LED Label LED Color-State Behavior Description
Solid green All power rails are within specifications.
PWR Power
Off Off, the route is in standby mode.
STAT System
status
Solid green Cisco IOS Software has successfully booted.
Yellow BOOT ROMmon has successfully loaded.
Red System failure. On Power up, turned off by
software.
Status LED descriptions
ACTV Activity Green Lit when this is the active route processor
(14 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals