Cisco ASR1000-RP2= Datasheet Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 14
Item
Details
The module meets the following NEBS:
GR-1089-CORE
GR-63-CORE
ETSI and EN Standards
EN300 386: Telecommunications Network Equipment (EMC), OTC
EN55022: Information Technology Equipment (Emissions)
EN55024: Information Technology Equipment (Immunity)
EN50082-1/EN-61000-6-1: 1995-Generic Immunity Standard
Environmental
Storage temperature: -38 to 150°F (-40 to 70°C)
Operating temperature, nominal: 41 to 104°F (5 to 40°C)
Operating temperature, short-term: 23 to 131°F (-5 to 55°C)
Storage relative humidity: 5 to 95% RH
Operating humidity, nominal: 5 to 85% RH
Operating humidity, short-term: 5 to 90% RH
Operating altitude: -60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)
Table 5. Cisco ASR 1002-X Integrated Route Processor Product Specifications
Item
Details
Chassis support
Cisco ASR 1002-X chassis
Software compatibility
Cisco IOS XE Software Release 3.7.0S and later versions
Software protocols
Refer to Cisco IOS XE 3.7.0S and later versions for protocol support.
Connectivity
Not applicable - route processor is integrated inside the chassis
Memory options
Cisco ASR 1002-X ships with 4-GB memory by default. It can be upgraded to 8- or 16-GB memory.
Cisco ASR 1002-X has 4 DRAM memory slots, which can take either 2- or 4-GB DRAM each.
When shipped with 4-GB DRAM (M-ASR1002X-4GB), 2 slots are filled with 2 GB each.
When shipped with 8-GB DRAM (M-ASR1002X-8GB), 4 slots are filled with 2 GB each.
When shipped with 16-GB DRAM (M-ASR1002X-16GB), 4 slots are filled with 4 GB each.
Storage options
8-GB eUSB memory is partitioned as two 32-MB of memory for NVRAM and the rest for mass storage.
The Cisco ASR 1002-X has an optional 160-GB HDD for storage.
Performance
With 4-GB memory:
Up to 500,000 IPv4 or 500,000 IPv6 routes
With 8-GB or more memory:
Up to 1,000,000 IPv4 or 1,000,000 IPv6 routes 8GB Memory
Up to 3,500,000 IPv4 or 3,000,000 IPv6 routes 16GB Memory
BGP RR Scalability up to 7,000,000 IPv4 or 6,000,000 IPv6 routes 8GB Memory
BGP RR Scalability up to 13,000,000 IPv4 or 11,000,000 IPv6 routes 16GB Memory
Reliability and availability
No route-processor hardware redundancy
Software redundancy available (requires software redundancy license and 8-GB memory)
MIBs
RFC 2737 compliant
Network management
Telnet and SSH Protocol (CLI)
Console port (through the CLI)
SNMP
RFC 2665
LEDs
PWR - Power
Green - All power rails are within specifications
STAT - Status
Green - Cisco IOS Software has booted
Yellow - BootROM has successfully loaded
Red - System failure or during boot process
CRIT - Critical Alarm
Red - Critical alarm or during boot process
MAJ - Major Alarm
Red - Major alarm
MIN - Minor Alarm
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments