Cisco WMP54GS User's Guide download pdf (Page 26)

Chapter 5: Using the Wireless Network Monitor

The Site Survey Tab

Wireless-G PCI Adapter with SpeedBooster

WEP Key Needed for Connection

Select 64-bit or 128-bit encryption from the drop-down menu. Enter a passphrase in the Passphrase field,

so a WEP key is automatically generated. It is case-sensitive, cannot be longer than 16 alphanumeric

characters, and must match the passphrase of your other Linksys wireless network devices. (If you have any

non-Linksys wireless products, enter the WEP key manually.) If you enter a manual WEP key, it must match

the WEP key of your wireless network. For 64-bit encryption, enter exactly 10 hexadecimal characters. For

128-bit encryption, enter exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and

“A” to “F”. Click the Connect button to continue.

WPA-Personal Needed for Connection

Select TKIP or AES for encryption. Then enter a Passphrase that is 8-63 characters in length. Click the

Connect button to continue.

WPA2-Personal Needed for Connection

Enter a Passphrase that is 8-63 characters in length. Click the Connect button to continue.

Figure 5-7: WPA-Personal Needed for Connection

Figure 5-8: WPA2-Personal Needed for Connection

Figure 5-6: WEP Key Needed for Connection

1 ... 25 26 27 ... 56

No comments

Cisco WMP54GS User's Guide Page 26