Cisco WUSB54GR-UK User's Guide download pdf (Page 32)

Chapter 5: Using the Wireless Network Monitor

Create a New Profile

Wireless-G USB Network Adapter with RangeBooster

3. The Wireless Mode screen shows a choice of two wireless modes. Click the Infrastructure Mode radio

button if you want to connect to a wireless router or access point. Click the Ad-Hoc Mode radio button if you

want to connect to another wireless device directly without using a wireless router or access point. Enter the

SSID for your network.

Infrastructure Mode - Use this mode if you want to connect to a wireless router or access point.

Ad-Hoc Mode - Use this mode if you want to connect to another wireless device directly without using a

wireless router or access point.

SSID - This is the wireless network name that must be used for all the devices in your wireless network. It is

case- sensitive and should be a unique name to help prevent others from entering your network.

Click the Next button to continue, or click the Back button to return to the previous screen.

4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, the Ad-Hoc Mode Settings

screen will appear.

Select the correct operating channel for your wireless network. The channel you choose should match the

channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep

the default setting.

Click the Next button. Click the Back button to change any settings.

5. If your wireless network doesn’t have wireless security, select Disabled and then click the Next button to

continue. Proceed to Step 6.

If your wireless network has wireless security, select the method of security used: WEP, WPA-Personal,

WPA-Enterprise, PSK2, or RADIUS. WEP stands for Wired Equivalent Privacy, and WPA stands for Wi-Fi

Protected Access. WPA is a stronger security method than WEP. RADIUS stands for Remote Authentication

Dial-In User Service. PSK2 stands for Pre-shared Key 2. Click the Next button to continue or the Back button

to return to the previous screen.

Proceed to the appropriate section for your security method: WEP, WPA-Personal, PSK2, WPA-Enterprise, or

RADIUS.

Figure 5-15: Wireless Mode

Figure 5-16: Ad-Hoc Mode Settings

encryption: encoding data transmitted in a network.

wpa (wi-fi protected access: a wireless security protocol

using TKIP (Temporal Key Integrity Protocol) encryption,

which can be used in conjunction with a RADIUS server.

wep (wired equivalent privacy): a method of encrypting network

data transmitted on a wireless network for greater security.

1 ... 31 32 33 ... 65

No comments

Cisco WUSB54GR-UK User's Guide Page 32