Cisco 1005 - 1005 Router User Manual download pdf (Page 11)

Platforms Supported

Using the Cisco Web Browser FC-117

When a Web Cache Control Protocol-enabled router receives an IP packet, the router determines if

the packet is a request that should be directed to a Cisco Cache Engine. The router looks for TCP as

the protocol ﬁeld in the IP header and for 80 as the destination port in the TCP header. If the packet

meets these criteria, it is redirected to a Cisco Cache Engine.

Through communication with the Cisco Cache Engines, the routers running WCCP are aware of

available cache engines.

Platforms Supported

WCCP is supported on the following platforms:

• Cisco 2500 series

• Cisco 3600 series

• Cisco 4000 series

• Cisco 4500 series

• Cisco 4700 series

• Cisco 5200 series

• Cisco 5300 series

• Cisco 7000 series with RSP7000

• Cisco 7200 series

• Cisco 7500 series

• Catalyst 5000

Web Cache Control Protocol Conﬁguration Task List

To use the Web Cache Control Protocol, IP must be conﬁgured on the interface connected to the

Internet and the interface connected to the Cisco Cache Engine.

The interface connected to the Cisco Cache Engine must be an Ethernet or Fast Ethernet interface.

To conﬁgure the Web Cache Control Protocol on the router, you must use the following tasks. The

ﬁrst task is required, while the rest are optional.

• Enable the Web Cache Control Protocol on the Router

• Monitor the Web Cache Control Protocol

1 ... 10 11 12 13 14 15 16

No comments

Cisco 1005 - 1005 Router User Manual Page 11