Cisco 12012 Technical Information download pdf (Page 14)

Command Reference

Release 11.2 GS

attach

To access the Cisco IOS software image on a line card to monitor and maintain information on the

line card, use the attach privileged EXEC command. To exit from the Cisco IOS software image on

the line card and return to the Cisco IOS image on the GRP card, use the exit command.

attach slot-number

Syntax Description

Default

Access to the Cisco IOS software image running on the GRP card.

Command Mode

Privileged EXEC

Usage Guidelines

This command was added in Cisco IOS Release 11.2 GS to support the Cisco 12000 series Gigabit

Switch Routers.

Use the attach EXEC command to get speciﬁc information about a line card.

After you connect to the Cisco IOS image on the line card using the attach command, the prompt

changes to “LC-Slotx#,” where x is the slot number of the line card.

You can also use the execute-on slot privileged EXEC command to execute commands on one or all

line cards.

Note Do not execute the conﬁg command from the Cisco IOS software image on the line card.

Note Because not all statistics are maintained on the line cards, the output from some of the show

commands might not be consistent.

slot-number Slot number of the line card you want to connect to. Slot numbers

range from 0 to 11 for the Cisco 12012 and 0 to 7 for the Cisco 12008.

If the slot number is omitted, you are prompted for the slot number.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Cisco 12012 Technical Information Page 14