Cisco 1605 - Router - EN User Manual download pdf (Page 4)

A. Connect the router to the local networks.

The router has three Ethernet ports, but supports only two Ethernet connections at one time. Connect the router

to your local Ethernet networks in one of these ways:

Option 1: Connect the ETHERNET Ø 10BASET port and the ETHERNET 1 10BASET port.

Option 2: Connect the ETHERNET Ø AUI port and the ETHERNET 1 10BASET port.

Install the Router (continued).

Option 1

You need two RJ-45-to-RJ-45 cables and two

Ethernet hubs or switches for this option.

Step 1 Connect one end of the ﬁrst cable to the

yellow ETHERNET Ø 10BASET port, and connect

the other end to a network port on the hub or switch.

Step 2 Connect the second cable to the yellow

ETHERNET 1 10BASET port as described inStep 1.

DO NOT INSTALL ANY WAN

MODULE WITH POWER ON

LNK LED

DO NOT INSTALL ANY WAN

MODULE WITH POWER ON

LNK LED

Option 2

You need one RJ-45-to-RJ-45 cable, one AUI cable,

and an Ethernet transceiver for this option. If the

transceiver connects directly to the router, you do

not need the AUI cable.

Step 1 Connect the Ethernet transceiver to the

yellow ETHERNET Ø AUI port, and connect the

transceiver to the local network.

Step 2 Connect one end of the RJ-45 cable to the

yellow ETHERNET 1 10BASET port, and connect

the other endto a network port on the hub or switch.

DO NOT INSTALL ANY WAN

MODULE WITH POWER ON

DO NOT INSTALL ANY WAN

MODULE WITH POWER ON

LNK LED

1 2 3 4 5 6 7 8

No comments

Cisco 1605 - Router - EN User Manual Page 4