13
Release Notes for Cisco IOS Release 12.0(5)T Feature Packs
78-10444-01
Related Documentation
This is the name of the image file on the router—not the full pathname of the image on the CD-ROM
attached to the PC. Refer to Table 4 in the “Feature Pack Overview Table” section on page 5 for the
UNIX image filename.
Destination file name [aaa1164.bin]? c800-y6-mw
During the transfer process, the software displays messages indicating that it has accessed the file you
have specified and is loading it.
Step 9 At the prompt, enter yes if you want to erase the existing image copy resident in the router Flash
memory before copying the new one.
Erase flash device before writing? [confirm] yes
The entire copying process takes several minutes and differs from network to network.
The exclamation point (!) indicates that the copy process is taking place. Each exclamation point (!)
indicates that ten packets have been transferred successfully. A checksum verification of the image
occurs after the image is written to Flash memory.
Step 10 Enter the reload command to reload the router:
Router# reload
After the reload is complete, the router should be running the required Cisco IOS image. Use the
show version command to verify it.
Related Documentation
The following sections describe the documentation available for the Cisco 802 IDSL and 804 IDSL
routers. These documents consist of hardware and software installation guides, Cisco IOS configuration
and command references, system error messages, feature modules, and other documents.
Documentation is available as printed manuals or electronic documents, except for feature modules,
which are available online on CCO and the Documentation CD-ROM.
Use these release notes with the documents listed in the following sections:
• Release-Specific Documents, page 13
• Platform-Specific Documents, page 14
• Feature Modules, page 15
• Cisco IOS Software Documentation Set, page 15
Release-Specific Documents
The following documents are specific to Release 12.0. They are located on CCO and the Documentation
CD-ROM:
• Release Notes for Cisco IOS Release 12.0
–
To reach the Cross-Platform Release Notes for Cisco IOS Release 12.0 from CCO, click on
this path (under the heading Service & Support):
Technical Documents: Documentation Home Page: Cisco IOS Software Configuration:
Cisco IOS Release 12.0: Release Notes: Cross-Platform Release Notes
Comments to this Manuals