Cisco C8510-SRP - Switch Route Processor Installation Guide download pdf (Page 10)

Release Notes for Cisco IOS Release 12.0(10)W5(18c) Feature Packs for the Cisco Catalyst 8500 CSR

78-10598-02

System Requirements

Table 13 Access Control Lists Feature Set Supported by the Catalyst 8540 CSR

Access Control Lists (ACL)

Layer 2 filtering:

• MAC address filtering standard ACL

Layer 3 filtering using an ACL daughter card:

• IP simple ACL (1-99, 1301-1999)

• IP extended ACL (100-199, 2000-2699)

–

TCP ACL based on TCP-precedence, TCP port number, TCP ToS, and TCP flags

–

UDP ACL based on UDP port number

–

ICMP ACL

• IPX standard ACL (800-899) without source node

• IOS ACL for control plane traffic (for example, route update filter, etc.)

• Named ACL

Note See the “Catalyst 8540 ACL Daughter Card Restrictions” section on page 15.

Table 14 ATM Uplink Feature Set Supported by the Catalyst 8540 CSR

ATM Uplink

ATM uplink: UNI 3.0

ATM uplink: UNI 3.1

ATM uplink: ILMI 3.1

ATM uplink: RFC 1483 for bridging

ATM uplink: RFC for routing (IP, IP multicast, IPX)

ATM uplink: RFC 1483 SVC support

ATM uplink: 13-bit virtual circuit number with up to 8K VCs

ATM uplink 4096 simultaneous SARs

ATM uplink: AAL 5

Table 15 Packet-over-SONET (POS) Feature Set Supported by the Catalyst 8540 CSR

Packet-over-SONET (POS)

POS: RFC 1619 PPP over SONET/SDH

POS: RFC 1662 PP in HDLC-like framing

POS: IP fragmentation for POS and ATM uplink

POS: SONET MIB as defined in RFC 1575

POS: Transparent Bridging (PPP/HDLC encapsulation)

POS: SPE payload scrambling

1 ... 9 10 11 ... 26

No comments

Cisco C8510-SRP - Switch Route Processor Installation Guide Page 10