Cisco Network Convergence System 6000 Series Installation Guide download pdf (Page 29)

5-29

Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide

Chapter 5 Installing Route Processor Cards, Line Cards, and Fabric Cards

About Line Cards

Table 5-5 describes the LEDs for the 60-port 10Gbps SFP+ LC.

1. The Attention LED can only be lit by using the hw-module attention-led location CLI command which is useful for identifying

and verifying which card needs attention.

Physical Characteristics

• Height—22.5 in. (57.2 cm)

• Depth—15.75 in.(40 cm)

• Width—2.1 in. (5.3 cm)

• Weight—26 lb (11.8 kg)

Table 5-5 60-Port 10Gbps SFP+ LC LED Descriptions

LED State Description

Status Green The LC is properly seated and operating correctly.

Yellow The LC has one or more errors detected.

Off No power is applied to the LC.

Attention

Blue The card needs attention.

Off The card does not need attention.

Port Green The link is up (including internal loopback).

Yellow The link is down or a hardware failure has occurred.

Off The slice is unprovisioned by software, the optics

module is missing, or the slice has been powered

down.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Cisco Network Convergence System 6000 Series Installation Guide Page 29