Cisco uBR10-SRP-OC12SML Specifications download pdf (Page 167)

3-31

Cisco uBR10012 Universal Broadband Router Software Configuration Guide

OL-1520-05

Chapter3 Configuring Cable Interface Features for the CiscouBR10012Router

Cable Interface Configuration Examples

Subinterface Definition on Bundle Master Example

The following example shows how to define subinterfaces on a bundle master and define Layer 3

configurations for each subinterface. In this example, the interfaces int c5/0/0 and int c4/0/0 are

bundled.

int c5/0/0

! No IP address

! MAC level configuration only

cable bundle 1 master

int c4/0/0

! No IP address

! MAC layer configuration

cable bundle 1

! first subinterface

int c5/0/0.1

ip address 10.22.64.0 255.255.255.0

cable helper-address 10.4.1.2

! second subinterface

int c5/0/0.2

ip address 10.12.39.0 255.255.255.0

cable helper-address 10.4.1.2

! third subinterface

int c5/0/0.3

ip address 10.96.3.0 255.255.255.0

cable helper-address 10.4.1.2

Cable Interface Bundle Master Configuration Example

The following example shows how to configure cable interface bundles:

Displaying the contents of the bundle

Router(config-if)# cable bundle ?

<1-255> Bundle number

Router(config-if)# cable bundle 25 ?

master Bundle master

<cr>

Router(config-if)# cable bundle 25 master ?

<cr>

Router(config-if)# cable bundle 25 master

Router(config-if)#

07:28:17: %uBR10000-5-UPDOWN: Interface Cable5/0/0 Port U0, changed state to down

07:28:18: %uBR10000-5-UPDOWN: Interface Cable5/0/0 Port U0, changed state to up

PE Router Configuration Example

This example (system information display) identifies the version of Cisco IOS software installed and

displays PE configurations:

! Defines the hostname of the Cisco uBR10012

hostname region-1-ubr

! Describes where the system is getting the software image it is running. In

! this configuration example, the system is loading a Cisco uBR10012 image named

! AdamSpecial from slot 0.

boot system flash slot0:uBR10000-p-mz.AdamSpecial

! Creates the enable secret password.

enable secret xxxx

enable password xxxx

! Sets QoS per modem for the cable plant.

no cable qos permission create

no cable qos permission update

cable qos permission modems

1 ... 166 167 168 ... 236

Comments to this Manuals

No comments

Cisco uBR10-SRP-OC12SML Specifications Page 167

Comments to this Manuals

Related products and manuals for Networking Cisco uBR10-SRP-OC12SML