Cisco WRT300N User's Guide download pdf (Page 67)

Appendix A: Troubleshooting

Frequently Asked Questions

Wireless-N Broadband Router

What is infrastructure mode?

When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with

a wired network through a wireless access point.

What is roaming?

Roaming is the ability of a portable computer to communicate continuously while the user and computer are

moving freely throughout an area greater than that covered by a single access point. Before using the roaming

function, the workstation must make sure that it is the same channel number with the access point of dedicated

coverage area.

To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each

node and access point, for example, must always acknowledge receipt of each message. Each node must

maintain contact with the wireless network even when not actually transmitting data. Achieving these functions

simultaneously requires a dynamic RF networking technology that links access points and nodes. In such a

system, the user’s end node undertakes a search for the best possible access to the system. First, it evaluates

such factors as signal strength and quality, as well as the message load currently being carried by each access

point and the distance of each access point to the wired backbone. Based on that information, the node next

selects the right access point and registers its address. Communications between end node and host computer

can then be transmitted up and down the backbone.

As the user moves on, the end node’s RF transmitter regularly checks the system to determine whether it is in

touch with the original access point or whether it should seek a new one. When a node no longer receives

acknowledgment from its original access point, it undertakes a new search. Upon finding a new access point, it

then re-registers, and the communication process continues.

What is ISM band?

The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM

(Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available

worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in

the hands of users around the globe.

What is Spread Spectrum?

Spread Spectrum technology is a wideband radio frequency technique developed by the military for use in

reliable, secure, mission-critical communications systems. It is designed to trade off bandwidth efficiency for

reliability, integrity, and security. In other words, more bandwidth is consumed than in the case of narrowband

transmission, but the trade-off produces a signal that is, in effect, louder and thus easier to detect, provided that

the receiver knows the parameters of the spread-spectrum signal being broadcast. If a receiver is not tuned to

the right frequency, a spread-spectrum signal looks like background noise. There are two main alternatives,

Direct Sequence Spread Spectrum (DSSS) and Frequency Hopping Spread Spectrum (FHSS).

1 ... 66 67 68 ... 90

No comments

Cisco WRT300N User's Guide Page 67