Cisco Linksys WAG160N User's Guide download pdf (Page 11)

Appendix A

Troubleshooting

Wireless ADSL2+ Modem Router

Appendix A:

Troubleshooting

Your computer cannot connect to the Internet.

Follow the instructions until your computer can connect

to the Internet:

Make sure that the Modem Router is powered on. The •

Power LED should be green and not flashing.

If the Power LED is flashing, then power off all of •

your network devices, including the Modem Router

and computers. Then power on each device in the

following order:

Modem Router1.

Computer2.

Check the LEDs on the front panel of the Modem •

Router. Make sure the Power, DSL, and at least one of

the numbered Ethernet LEDs are lit. If they are not,

then check the cable connections. The computer

should be connected to one of the Ethernet ports

numbered 1-4 on the Modem Router, and the DSL

port of the Modem Router must be connected to the

ADSL line.

When you double-click the web browser, you are

prompted for a user name and password. If you want to

get rid of the prompt, follow these instructions.

Launch the web browser and perform the following steps

(these steps are specific to Internet Explorer but are similar

for other browsers):

Select 1. Tools > Internet Options.

Click the 2. Connections tab.

Select 3. Never dial a connection.

Click 4. OK.

You are using a static IP address and cannot connect.

Refer to Windows Help and change your Internet Protocol

(TCP/IP) Properties to Obtain an IP address automatically.

The computer cannot connect wirelessly to the network.

Make sure the wireless network name or SSID is the same

on both the computer and the Modem Router. If you

have enabled wireless security, then make sure the same

security method and key are used by both the computer

and the Modem Router.

You need to modify the basic settings on the Modem

Router.

Run the Setup Wizard on the Setup CD-ROM.

You need to modify the advanced settings on the Modem

Router.

Open the web browser (for example, Internet Explorer or

Firefox), and enter the Modem Router’s IP address in the

address field (the default IP address is 192.168.1.1). When

prompted, complete the User name and Password fields

(the default user name and password is admin). Click the

appropriate tab to change the settings

WEB: If your questions are not

addressed here, refer to the website,

www.linksysbycisco.com/support

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 95 96

Comments to this Manuals

No comments

Cisco Linksys WAG160N User's Guide Page 11

Comments to this Manuals

Related products and manuals for Routers Cisco Linksys WAG160N