Cisco CIVS-IPC-2500 Specifications Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
12
March 2009
Power Supply - Model PTZ-PWR
The VSS-PTZ-PWR is specifically made for handling the requirements of outdoor rated PTZ
cameras. It has one fused output and is capable of handling up to 4 A (100 VA) of total load. It
is an outdoor camera power supply, 100/120/240 VAC input. It has one 24VAC output, total cur-
rent capacity of 4A (100 VA).
Product Capacity Chart
A partial list of compatible products and the number of units that may be powered by each pow-
er supply are listed below. Capacity is based on the VA rating of each product to be used with
the power supply.
Mechanical
Cable Entry Hole plugs for 0.75-inch (1.9 cm) conduit. Latch Stainless steel link-lock latch; can
be secured with padlock (not supplied)
Electrical
Input Voltage SI-PTZ-PWR 100/120/240 VAC, 50/60 Hz Output Voltage SI-PTZ-PWR 4/26/28
VAC Required Input Current 1 A Output Fuse/Circuit Breaker Ratings SI-PTZ-PWR 4 A* Input
Connectors: Screw-type barrier strips Output Connectors Screw-type barrier strips Input Wire
Size 12-16 gauge solid wire Output Wire Size SI-PTZ-PWR 16-20 gauge solid or stranded wire
Recommended Wiring Distance
At 24VAC and 70 VA do not exceed 41 feet with 20AWG, 64 feet with 18AWG and 102 feet with
16AWG.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 83 84

Comments to this Manuals

No comments