Cisco 7008P - SFS InfiniBand Server Switch Installation Guide download pdf (Page 5)

Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note

78-17434-01 Rev. A0

Verifying Basic Hardware

Figure 2 Cisco SFS 7008P Switch Front ViewWithout Bezel

Step 4 Verify that you have at least one power supply installed. (See Figure 2.)

Step 5 Verify that you have at least one fan module installed. (See Figure 2.)

Step 6 Verify that you have at least one fabric module installed in one of the node slots. The node slots are 9,

10, 13 and 14. (See Figure 2.)

Step 7 Verify that you have two LIMs installed for each fabric module in the node slots. See Figure 3 for an

example of the connections between the LIMs and the fabric modules in the node slots:

154497

System

Status LED

Power Supply

identity LED

Power supplies

Fan Fan

Node slot 1 Slot 9

Slot 10

Slot 11

Slot 12

Slot 13

Slot 14

Node slot 2

Node slot 3

Node slot 4

Core slot 1

Core slot 2

Fan tray LED

1 2 3 4 5 6 7 8 9 10 ... 33 34

No comments

Cisco 7008P - SFS InfiniBand Server Switch Installation Guide Page 5