Cisco IE 2000 Specifications download pdf (Page 279)

17-21

System Management Software Configuration Guide for Cisco IE 2000U and Connected Grid Switches

Chapter 17 Configuring Ethernet OAM, CFM, and E-LMI

Configuring Ethernet CFM

To remove an IP SLAs operation, enter the no ip sla operation-number global configuration command.

EXAMPLE

Switch(config)# ip sla 1

Switch(config-ip-sla)# ethernet echo mpid 222 domain abc vlan 10

Switch(config-ip-sla)# exit

Switch(config)# ip sla schedule 1 start-time after 00:05:00

Switch(config)# end

Step 11

timeout milliseconds (Optional) Specify the amount of time in ms that the

IP SLAs operation waits for a response from its

request packet. The range is 0 to 604800000; the

default value is 5000.

Step 12

exit Return to global configuration mode.

Step 13

ip sla schedule operation-number [ageout

seconds] [life {forever | seconds}] [recurring]

[start-time {hh:mm {:ss} [month day | day

month] | pending | now | after hh:mm:ss}]

Schedule the time parameters for the IP SLAs

operation.

• operation-number—Enter the IP SLAs

operation number.

• (Optional) ageout seconds—Enter the number

of seconds to keep the operation in memory

when it is not actively collecting information.

The range is 0 to 2073600 seconds. The default

is 0 seconds.

• (Optional) life—Set the operation to run

indefinitely (forever) or for a specific number of

seconds. The range is from 0 to 2147483647.

The default is 3600 seconds (1 hour).

• (Optional) recurring—Set the probe to be

automatically scheduled every day.

• (Optional) start-time—Enter the time for the

operation to begin collecting information:

–

To start at a specific time, enter the hour,

minute, second (in 24-hour notation), and

day of the month.

–

Enter pending to select no information

collection until a start time is selected.

–

Enter now to start the operation

immediately.

–

Enter after hh:mm:ss to show that the

operation should start after the entered time

has elapsed.

Step 14

end Return to privileged EXEC mode.

Step 15

show ip sla configuration [operation-number] Show the configured IP SLAs operation.

Step 16

copy running-config startup-config (Optional) Save your entries in the configuration

file.

Command Purpose

1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 335 336

Comments to this Manuals

No comments

Cisco IE 2000 Specifications Page 279

Comments to this Manuals

Related products and manuals for Software Cisco IE 2000