Cisco 2600 User Manual download pdf (Page 19)

Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers 19

Alternatives to RSL

The following example shows how to use the copy xmodem ﬂash command on a Cisco 2600 series

router.

Router# copy xmodem flash

**** WARNING ****

x/ymodem is a slow transfer protocol limited to the current speed

settings of the auxiliary/console ports. The use of the auxiliary

port for this download is strongly recommended.

During the course of the download no exec input/output will be

available.

---- ******* ----

Proceed? [confirm] yes

Use crc block checksumming? [confirm] yes

Max Retry Count [10]:

Perform image validation checks? [confirm] yes

Xmodem download using crc checksumming with image validation

Continue? [confirm] yes

Partition Size Used Free Bank-Size State Copy Mode

1 4096K 3259K 836K 4096K Read/Write Direct

2 4096K 0K 4095K 4096K Read/Write Direct

[Type ?<no> for partition directory; ? for full directory; q to abort]

Which partition? [default = 1] 2

System flash directory, partition 2:

File Length Name/status

1 68 TESTFILE

[132 bytes used, 4194172 available, 4194304 total]

Destination file name? c3620-i-mz.0918

Erase flash device before writing? [confirm] yes

Flash contains files. Are you sure you want to erase? [confirm]y

Copy '' from server

as 'c3620-i-mz.0918' into Flash WITH erase? [yes/no] yes

Erasing device... eeeeeeeeeeeeeeee ...erased

Ready to receive file...........C

Verifying checksum... OK (0x5DE8)

Flash device copy took 00:12:06 [hh:mm:ss]

Installing the Router Software Using a TFTP Server Application

Use this TFTP server application method as an alternative to using the RSL to install the router

software from the CD-ROM. You can perform this procedure using a PC (running Microsoft

Windows 95 or Microsoft Windows 3.1), a Macintosh, or a UNIX system. You can use either the

copy tftp ﬂash or copy rcp ﬂash command to download the router software to the router.

First, obtain a TFTP application or a remote copy protocol (rcp) application to set up your computer

as a TFTP server or a rcp server. Only use the RSL or the TFTP server included on the feature pack

CD-ROM to install the router software if you are using a PC running Windows 95. For other

operating systems, a number of TFTP or rcp applications are available from independent software

vendors or available as shareware from public sources on the World Wide Web.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comments to this Manuals

No comments

Cisco 2600 User Manual Page 19

Comments to this Manuals

Related products and manuals for Hardware Cisco 2600