Cisco 2600 User Manual download pdf (Page 3)

Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers 3

Memory Options

Table 1 describes default memory and upgrade options for Cisco 2600 series.

Routers and Interfaces Supported

The Cisco 2600 series includes the following routers:

• Cisco 2610

• Cisco 2611

• Cisco 2612

• Cisco 2613

• Cisco 2620

• Cisco 2621

These routers support the interfaces shown in Table 2.

Note Part numbers without an equals sign (=) identify products installed in a router at the factory.

Part numbers followed by an equals sign identify the same products sold as spares (separately).

Table 1 Cisco 2600 Series Default Memory and Upgrade Options

Memory Type Default Upgrade Options

Flash 8 MB 16 MB Flash SIMM: MEM2600-16FS=

16 MB Flash SIMM: MEM2600-8U16FS=

DRAM 24 MB

1 Routers shipped after February 16, 2000, have 32 MB DRAM.

24 to 32 MB DRAM: MEM2600-24U32D=

24 to 48 MB DRAM: MEM2600-24U48D=

24 to 64 MB DRAM: MEM2600-24U64D=

DRAM DIMM 24 MB 4 MB DRAM DIMM: MEM2600-4D=

8 MB DRAM DIMM: MEM2600-8D=

16 MB DRAM DIMM: MEM2600-16D=

32 MB DRAM DIMM: MEM2600-32D=

Table 2 Interfaces Supported on Cisco 2600 Series Routers

Interface, Network Module, or Data Rate

Routers Supported

LAN Interfaces

1- or 2-port Ethernet (10BaseT) Cisco 2610, Cisco 2611, Cisco 2612

1-port Token Ring (RJ-45) Cisco 2612, Cisco 2613

1- or 2-port Ethernet (10/100BaseT) Cisco 2620, Cisco 2621

LAN Network Modules

1-port Ethernet All Cisco 2600 series routers

4-port Ethernet All Cisco 2600 series routers

1-port ATM-25 RJ-45 interface All Cisco 2600 series routers

Serial Network Modules

16- or 32-port asynchronous All Cisco 2600 series routers

4- or 8-port asynchronous/synchronous serial low speed

(128 kbps max)

All Cisco 2600 series routers

1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments

Cisco 2600 User Manual Page 3

Comments to this Manuals

Related products and manuals for Hardware Cisco 2600