Cisco AIR-ANTM5560P-R= Datasheet download pdf (Page 10)

Cisco Multiband Wall-Mount Antenna (AIR-ANTM5560P-R)

OL-6847-01

Installation Instructions

The following sections contain procedures for installing the antenna on a wall or pole. The following

parts are included with your antenna:

• Molded antenna mount

• Molded wall mount

• Articulating arm

• Four 8-32 nylon lock nuts

• Two 1/4-in. lock washers

• Two 1/4-in. flat washers

• Two 1/4-20 x 1-1/4-in. machine screws

• Two 1/4-20 hex nuts

For mounting on a wall:

• Four wall anchors

• Four 8-18 x 3/4-in. self-tapping Phillips screws

For mounting on a pole:

• Two worm tie clamps

Tools and Equipment Required

To install the antenna, you will need the following tools and equipment:

• Adjustable wrench

• A Phillips screwdriver

• A pencil

For mounting on a wall:

• A portable hand or electric drill

• A 3/16 in. (4.7 mm) drill bit

For mounting on a pole:

• A small flat-blade screwdriver

Mounting on a Wall

This section provides instructions for mounting the antenna on a wall. (See Figure 6.)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Cisco AIR-ANTM5560P-R= Datasheet Page 10