Cisco BayTech DS Series Owner's Manual download pdf (Page 14)

DS-RPC Manual

Logging Out

To logoff from the unit type Logout, Logoff, or Exit at the prompt. Logging out may not close the

session.

Current User Password:

To change the current user’s password, type ‘password’ at the prompt and the DS will respond:

If the current user already has a password the DS will respond:

NOTE: If you do not have the user’s current password or it’s lost, delete the user. Reinstall the

user. Select option to change password and the DS will respond as in previous paragraph.

Identify Current User

As the admin user you may forget if you are logged in as the admin or regular user. Type ‘whoami’,

the DS respond:

To change the user logout of the unit and log back in using the new user name.

Unit Identification

Type ‘unitid’ at the prompt, the DS respond:

To change the unit ID, go the Outlet Configuration menu and select ‘Change Unit ID’ option. The

maximum field length is 32 or 16 for older units.

DS-RPC Configuration Menu

To select the configuration menu, type ‘config’ at the prompt.

1)...Manage Users

2)...Change Outlet Name

3)...Enable/Disable Confirmation

4)...Enable/Disable Status Menu

5)...Change Unit ID

6)...Change Alarm Threshold

X)...Exit

Enter new Password:

Re-Enter new Password:

Enter old Password:

Enter new Password:

Re-Enter new Password:

Current User: admin

Unit ID: DS4D-RPC

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Cisco BayTech DS Series Owner's Manual Page 14