Cisco CATALYST 3560-E Specifications download pdf (Page 13)

Data Sheet

Table 2. Cisco Catalyst 3560 Series Switch Hardware

Description Specification

Performance



32 Gbps forwarding bandwidth



Forwarding rate based on 64-byte packets:

38.7 Mpps (Cisco Catalyst 3560G-48TS, Catalyst 3560G-48PS, Catalyst 3560G-24TS, and

Catalyst 3560G-24PS);

13.1 Mpps (Cisco Catalyst 3560-48TS and Catalyst 3560-48PS);

6.5 Mpps (Cisco Catalyst 3560-24TS and Catalyst 3560-24PS);

2.7 Mpps (Cisco Catalyst 3560-8PC)



128 MB DRAM



32 MB Flash memory (Cisco Catalyst 3560G-24TS, Catalyst 3560G-24PS, Catalyst 3560G-

48TS, Catalyst 3560G-48PS, Catalyst 3560-24TS, Catalyst 3560-48TS, and Catalyst 3560-

8PC);



16-MB Flash memory (Cisco Catalyst 3560-48PS and Catalyst 3560-24PS)



Configurable up to 12,000 MAC addresses



Configurable up to 11,000 unicast routes



Configurable up to 1000 IGMP groups and multicast routes



Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum

Ethernet frame size of 9018 bytes (Jumbo frames), for bridging on Gigabit Ethernet ports, and

up to 1546 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on

10/100 ports

Connectors

and Cabling



10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair

(UTP) cabling



10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins

1,2 (negative) and 3,6 (positive)



100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling



100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins

1,2 (negative) and 3,6 (positive)



1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling



1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling



1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors

(single/multimode fiber)



Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm



Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections,

use RJ-45-to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered

separately from Cisco; part number ACS-DSBUASYN=)

Power Connectors



Customers can provide power to a switch by using either the internal power supply or the

Cisco RPS 2300. The connectors are located at the back of the switch.

Note: The Cisco Catalyst 3560-8PC does not have an RPS port.



Internal-Power-Supply Connector



The internal power supply is an autoranging unit.



The internal power supply supports input voltages between 100 and 240 VAC.



Use the supplied AC power cord to connect the AC power connector to an AC power outlet.



Cisco RPS Connector



The connector offers connection for an optional Cisco RPS 2300 that uses AC input and

supplies DC output to the switch.



The connector supports up to six external network devices and provides power to two failed

devices at a time.



The connector automatically senses when the internal power supply of a connected device

fails and provides power to the failed device, preventing loss of network traffic.



Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-

power-supply receptacle.

Indicators



Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE

applied, PoE error, and PoE disabled indications



System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications

Dimensions

(H x W x D)



Cisco Catalyst 3560-8PC: 1.73 x 10.6 x 9.1 in. (4.4 x 27 x 23 cm)



Cisco Catalyst 3560-24TS: 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30.1 cm)



Cisco Catalyst 3560-48TS: 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30.1 cm)



Cisco Catalyst 3560-24PS: 1.73 x 17.5 x 11.8 in. (4.4 x 44.5 x 30.1 cm)



Cisco Catalyst 3560-48PS: 1.73 x 17.5 x 14.9 in. (4.4 x 44.5 x 37.8 cm)



Cisco Catalyst 3560G-24TS: 1.73 x 17.5 x 14.9 in. (4.4 x 44.5 x 37.8 cm)



Cisco Catalyst 3560G-48TS: 1.73 x 17.5 x 16.1 in. (4.4 x 44.5 x 40.9 cm)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Comments to this Manuals

No comments

Cisco CATALYST 3560-E Specifications Page 13

Comments to this Manuals

Related products and manuals for Network switches Cisco CATALYST 3560-E