Cisco WS-X4148-FX-MT Datasheet download pdf (Page 31)

1-31

Catalyst 4500 Series Module Installation Guide

78-13267-06

Chapter 1 Module Overview and Specifications

Gigabit Ethernet Switching Modules

Figure 1-28 WS-X4306-GB 6-Port Gigabit Ethernet Switching Module

WS-X4506-GB-T

The WS-X4506-GB-T 6-port Gigabit Ethernet switching module (see

Figure 1-28) has the following specifications:

Note There are six10/100/1000BASE-T and six 1000BASE-X SFP Gigabit Ethernet

connectors present. Use the select media sfp | rj45 command to set whether a

specific port number uses the SFP or RJ-45 connector. SFP is the default.

16673

Specification Description

Module type 10/100/1000BASE-T Fast Ethernet with IEEE802.3af

PoE or 1000BASE-X SFP Gigabit Ethernet switching

module

Port duplex mode Half or full duplex mode

Port speed 10, 100, or 1000 Mbps

Number of ports 6 total

Connector type RJ-45 (See Figure 2-1 on page 2-2.)

LC type (See Figure 2-9 on page 2-6.)

Cable type Category 5 UTP (1000BASE-T)

MMF or SMF (1000BASE-X, LX fiber-optic cable

only)

Power over Ethernet Up to 15.4 W per powered device on all 6 ports

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

No comments

Cisco WS-X4148-FX-MT Datasheet Page 31