Cisco 1710 Technical Information download pdf (Page 11)

Installing and Upgrading Memory in Cisco 1700 Series Routers

OL-3892-02

Locating Modules

Figure 2 Removing the Cisco 1760 Chassis Screws

Step 3 Gently slide the top cover of the router toward you, as shown in Figure 3.

Figure 3 Removing the Top Cover of the Router

Step 4 Place the router bottom on an antistatic mat, and begin installing modules.

Locating Modules

Figure 4 on page 12 and Figure 6 on page 14 show where to install DIMMs and mini-flash modules on

the Cisco 1720 and Cisco 1750 router motherboards. Figure 5 on page 13 shows where to install DIMMs

on the Cisco 1721 router motherboard. Figure 7 on page 15 shows where to install DIMMs on the

Cisco 1751 router motherboard. Figure 8 on page 15 shows where to install DIMMs and mini-flash

SIMMs on the Cisco 1760 router motherboard.

Note There are no mini-flash modules on the Cisco 1721, Cisco 1751 or Cisco 1760 routers.

100-240V~

1.5 MAX/1.5A MAX

50-60 Hz

60956

Chassis

screw

100-240V~

1.5 MAX/1.5A MAX

50-60 Hz

Pull the top cover

off in this direction.

60957

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

No comments

Cisco 1710 Technical Information Page 11