Cisco 1710 Technical Information download pdf (Page 18)

Installing and Upgrading Memory in Cisco 1700 Series Routers

OL-3892-02

Installing a SIMM

Step 4 Insert the DIMM into the DIMM slot, making sure that the notches on the edge of the DIMM are inserted

over the bars inside the DIMM slot, as in Figure 12 below.

Step 5 Firmly press the DIMM into the slot until the two slot guides on each side of the slot move up and over

the end of the DIMM, as in Figure 12 below. If the guides do not move up over the edge of the DIMM,

move them with your hands.

Figure 12 Installing a DIMM

Installing a SIMM

You can install one SIMM to increase the amount of flash memory in the router. Follow these steps to

install a SIMM on the router motherboard.

Warning

During this procedure,wear grounding wriststraps to avoid ESD damage totherouter. Do not directly

touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

Take the following steps to install a SIMM on the router motherboard:

Step 1 Locate the SIMM slot on the motherboard. See Figure 8 on page 15.

Step 2 Remove any existing SIMM by pulling the locking spring clips on both sides outward and tilting the

SIMM free of the clips.

Step 3 Face the front panel of the router. Hold the SIMM with the component side toward you.

Caution Handle SIMMs by the card edges only. SIMMs are ESD-sensitive components and can be damaged by

mishandling.

DIMM module

DIMM slot

12611

DIMM slot guides

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Cisco 1710 Technical Information Page 18