Cisco SPA3102 User's Guide download pdf (Page 17)

Voice Gateway with Router

Chapter 4: Getting Started

Before You Begin

Chapter 4: Getting Started

Before You Begin

Make sure you have the following:

• An active Internet connection

• An active Internet phone service account and its settings

• cable/DSL modem

• One computer for configuration of the Voice Gateway

• Analog telephone or fax machine with an RJ-11 phone cable

Connecting the Voice Gateway

1. Power off your network devices, including your modem and PC.

2. If you have traditional phone service, connect the RJ-11 phone cable (included) to the Voice Gateway’s LINE

port and your telephone wall jack.

3. Connect one end of a different RJ-11 phone cable to the Voice Gateway’s PHONE port. Connect the other

end to your analog telephone or fax machine.

Figure 4-1: Connect to the Telephone

Wall Jack

IMPORTANT: Do not connect the PHONE port to a telephone wall jack. Make sure you only

connect a telephone or fax machine to the PHONE port. Otherwise, the Voice Gateway or the

telephone wiring in your home or office may be damaged.

Figure 4-2: Connect a Telephone

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 99 100

No comments

Cisco SPA3102 User's Guide Page 17