Cisco 600W User Manual download pdf (Page 8)

LEDs

Catalyst 2900 Series XL Installation and Configuration Guide

1-8

System LED

The system LED indicates whether the system is receiving power and functioning properly.

Table 1-2 lists the LED colors and their meanings.

Table 1-2 System LED

RPS LED

The redundant power system (RPS) LED shows the RPS status. Table 1-3 lists the LED

colors and their meanings.

Table 1-3 RPS LED

Color System Status

Off System is not powered up.

Green System is operating normally.

Amber System is receiving power but is not functioning properly.

Color RPS Status

Off RPS is off or is not installed.

Green RPS is operational.

Flashing green The RPS and the switch AC power supply are both powered up. If the

switch power supply fails, the switch powers down and restarts after

15 seconds using power from the RPS. The switch goes through its normal

boot sequence when it restarts.

Amber RPS is connected but not functioning properly. One of the power supplies

in the RPS could be powered down or a fan on the RPS could have failed.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Cisco 600W User Manual Page 8